19
« Last post by ansedor on February 14, 2018, 01:15:24 PM »
Now I changed the file and rebooted. Got:
lsusb
Bus 003 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
lsusb -t
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=aotg_hcd/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
|__ Port 1: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
Now I burned the img-file to the bootcard, and rebooted. No difference.
From dmesg:
10.934627] [PowerGate] name: 'usb2_0', on: 1, before SPS_PG_CTL: 0x717761
[ 10.938338] [PowerGate] name: 'usb2_0', on: 1, after SPS_PG_CTL: 0x71ff61
[ 10.938360] start mon 0 ......
[ 10.939188] [PowerGate] name: 'usb2_1', on: 1, before SPS_PG_CTL: 0x71ff61
[ 10.939273] [PowerGate] name: 'usb2_1', on: 1, after SPS_PG_CTL: 0x75ff65
....
[ 11.452931] [PowerGate] name: 'usb2_0', on: 0, before SPS_PG_CTL: 0x75ff65
[ 11.456187] [PowerGate] name: 'usb2_0', on: 0, after SPS_PG_CTL: 0x75f765
[ 11.456714] res_mem->start--end = 0xb0600000--0xb0600fff
[ 11.456777] aotg_hcd aotg_hcd.0: pdev->id probe:0
[ 11.456791] [PowerGate] name: 'usb2_0', on: 1, before SPS_PG_CTL: 0x757765
[ 11.456856] [PowerGate] name: 'usb2_0', on: 1, after SPS_PG_CTL: 0x75ff65
[ 11.456875] usb reset OK: 0.
[ 11.457101] aotg_hcd aotg_hcd.0: AOTG USB Host Controller Driver
[ 11.458860] aotg_hcd aotg_hcd.0: new USB bus registered, assigned bus number 3
[ 11.458951] aotg_hcd aotg_hcd.0: irq 56, io mem 0xb0600000
[ 11.458957] aotg_hcd aotg_hcd.0: <HCD> start
[ 11.459073] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 11.459079] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.459084] usb usb3: Product: AOTG USB Host Controller Driver
[ 11.459087] usb usb3: Manufacturer: Linux 3.10.38 aotg_hub_hcd
[ 11.459091] usb usb3: SerialNumber: aotg_hcd.0
[ 11.460911] hub 3-0:1.0: USB hub found
[ 11.460960] hub 3-0:1.0: 1 port detected
[ 11.461360] USBEIEN(0xf01fc50b): 0x80
[ 11.461407] aotg_hcd aotg_hcd.0: hcd controller initialized. OTGIRQ: 0x01, OTGSTATE: 0x02
[ 11.461411] USBEIRQ(0xf01fc50a): 0x00
[ 11.571381] port_no:0 OTG IRQ, OTGSTATE: 0x03, USBIRQ:0x00
[ 11.572844] aotg_hcd aotg_hcd.0: <USB> aotg_hcd.0 connection changed: 1, acthcd->inserted: 1
[ 11.572856] aotg_hub_hotplug_timer:1768, dbg!
[ 11.734614] set port reset!80
[ 11.737551] USBRESET IRQ
[ 11.740383] aotg_hub_irq: USB device is 2
[ 11.787970] USBRESET IRQ
[ 11.790954] aotg_hub_irq: USB device is 3
[ 11.852958] usb 3-1: new high-speed USB device number 2 using aotg_hcd
[ 11.852994] aotg_hcd aotg_hcd.0: device addr : 0x00000000
[ 11.854811] set port reset!80
[ 11.908170] USBRESET IRQ
[ 11.911002] aotg_hub_irq: USB device is 3
[ 11.973158] aotg_hcd aotg_hcd.0: <EP DISABLE> ep0 index 0 from ep [in]
[ 11.992960] aotg_hcd aotg_hcd.0: device addr : 0x00000002
[ 11.993755] usb 3-1: New USB device found, idVendor=1a40, idProduct=0101
[ 11.993781] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 11.993791] usb 3-1: Product: USB 2.0 Hub
[ 11.994822] hub 3-1:1.0: USB hub found
[ 11.994974] hub 3-1:1.0: 4 ports detected