SPARKY FORUM

AUDIO => PIANO HI-FI DAC 2.1 => Topic started by: mkaf on April 05, 2017, 01:11:39 PM

Title: purepath bin files
Post by: mkaf on April 05, 2017, 01:11:39 PM
hi,

i have completed bin-file generation process following your guideline ?successfully.

everything worked like described but i am looking for information how to enable the different settings.

if there are more than 2 bin-files in directory /lib/firmware/allo/pian/2.2 how does the driver select and activate specific bin-files?

best regards
mkaf
Title: Re: purepath bin files
Post by: sparkyadmin on April 05, 2017, 09:51:42 PM
Hi,

    Files are selected depending on the following:

1. Mode selected (2.1 or 2.2) - selects the files from respective folders

    /lib/firmware/allo/piano/2.1 => Mono sub-woofer bin files
    /lib/firmware/allo/piano/2.2 => Stereo sub-woofer and audio-speaker bin files.


2. Sample rate: 44100, 48000, 88200, 96000, 176400 or 192000


3. cut-off (cross-over) frequency : 60, 70, . 190 or 200


4. sub-woofer: 1 for subwoofer & 0 for audio-speakers.

File is named according to these values: allo-piano-dsp-<sampling rate>-<cut-off-frequency>-<sub-woofer>.bin

With Regards
Sparky Admin
Title: Re: purepath bin files
Post by: mkaf on April 05, 2017, 11:30:30 PM
dear admin,

thank you for the prompt response. pls see the screendumps attached.
on a fresh pietdi installation none of the files was read (see dmesg-output).

pls tell how israte 44100 and cut-off 100hz selected and how to change from rate 44100 to 4800, cut-off 100hz.

best regards
mkaf
Title: Re: purepath bin files
Post by: sparkyadmin on April 06, 2017, 08:43:00 PM
Dear Mkaf,

   We are not received any attachments.

With Regards
Sparky Admin
Title: Re: purepath bin files
Post by: mkaf on April 06, 2017, 11:14:03 PM
here there are again, bin-files.jpg and dmesg.jpg

...in the meantime i solved problem by myself.

best regards
mkaf
Title: Как открыть р
Post by: Sergeysag on July 16, 2017, 07:18:53 PM
Как открыть ресторан или  кафе? Все ответы Вы можете найти у нас на форуме Ресторанного франчайзинга.
На форуме ресторанного франчайзинга будет:
 
30 И БОЛЕЕ БРЕНДОВ РЕСТОРАННОГО ФРАНЧАИ?ЗИНГА
6 ДОКЛАДОВ МЕЖДУНАРОДНЫХ СПИКЕРОВ С РЕАЛЬНЫМИ КЕИ?САМИ И ИСТОРИЯМИ УСПЕХА
14 ЧАСОВ ОБРАЗОВАТЕЛЬНОИ? СЕССИИ
Выставка франшиз
Зал презентации франшиз
Практические доклады: управление, маркетинг, финансы, сервис, персонал и юридические вопросы
Представители поставщиков оборудования, продуктов питания и напитков, IT технологии и сервисов для ресторанных сетеи
 Зарегистрироваться можно здесь http://franchithink.com/#1#pricing
Title: purepath bin files
Post by: kurasov1965S on September 25, 2017, 09:18:50 AM
I haven't used it in a while, but I did manage to successfully use that program for a few FF7 BIN files not sure if that included WINDOW.BIN. Did you follow the instructions included?
Title: purepath bin files
Post by: kovaliev.S-1967 on October 03, 2017, 10:49:53 AM
Hi again,

Have received a file from a friend over Xmas that is a .bin file when extracted turns into a .cpgz file and when that is extracted turns back into a .bin file. Its some video that he shot that I would like to see. Any way of extracting this file?
Roman