SPARKY FORUM

purepath bin files

purepath bin files
« on: April 05, 2017, 01:11:39 PM »
hi,

i have completed bin-file generation process following your guideline ?successfully.

everything worked like described but i am looking for information how to enable the different settings.

if there are more than 2 bin-files in directory /lib/firmware/allo/pian/2.2 how does the driver select and activate specific bin-files?

best regards
mkaf

Re: purepath bin files
« Reply #1 on: April 05, 2017, 09:51:42 PM »
Hi,

    Files are selected depending on the following:

1. Mode selected (2.1 or 2.2) - selects the files from respective folders

    /lib/firmware/allo/piano/2.1 => Mono sub-woofer bin files
    /lib/firmware/allo/piano/2.2 => Stereo sub-woofer and audio-speaker bin files.


2. Sample rate: 44100, 48000, 88200, 96000, 176400 or 192000


3. cut-off (cross-over) frequency : 60, 70, …. 190 or 200


4. sub-woofer: 1 for subwoofer & 0 for audio-speakers.

File is named according to these values: allo-piano-dsp-<sampling rate>-<cut-off-frequency>-<sub-woofer>.bin

With Regards
Sparky Admin

Re: purepath bin files
« Reply #2 on: April 05, 2017, 11:30:30 PM »
dear admin,

thank you for the prompt response. pls see the screendumps attached.
on a fresh pietdi installation none of the files was read (see dmesg-output).

pls tell how israte 44100 and cut-off 100hz selected and how to change from rate 44100 to 4800, cut-off 100hz.

best regards
mkaf

Re: purepath bin files
« Reply #3 on: April 06, 2017, 08:43:00 PM »
Dear Mkaf,

   We are not received any attachments.

With Regards
Sparky Admin

Re: purepath bin files
« Reply #4 on: April 06, 2017, 11:14:03 PM »
here there are again, bin-files.jpg and dmesg.jpg

...in the meantime i solved problem by myself.

best regards
mkaf

тренажер буб
« Reply #5 on: July 16, 2017, 07:18:53 PM »
Добрый день.
Очень нравится этот сайт.
Благодарю создателей сайта за интересный контент.
« Last Edit: October 05, 2017, 09:39:56 PM by Sergeysag »

purepath bin files
« Reply #6 on: September 25, 2017, 09:18:50 AM »
I haven't used it in a while, but I did manage to successfully use that program for a few FF7 BIN files not sure if that included WINDOW.BIN. Did you follow the instructions included?

purepath bin files
« Reply #7 on: October 03, 2017, 10:49:53 AM »
Hi again,

Have received a file from a friend over Xmas that is a .bin file when extracted turns into a .cpgz file and when that is extracted turns back into a .bin file. Its some video that he shot that I would like to see. Any way of extracting this file?
Roman